Resilient Anti Slip Tape 60' Roll

Product Description

Overview

Resilient anti-slip tape is the entry-level, thin-profile member of iFloortape's Resilient family. Constructed from a plasticized flexible-PVC film manipulated during manufacturing to produce a soft, rubbery feel, it delivers the slip protection of a traditional safety tape without the harsh, abrasive grit — making it ideal for spaces where people are barefoot, in light footwear, or in direct skin contact with the surface.

The tape's fine orange-peel embossed micro-texture provides consistent traction underfoot, sheds water quickly, and cleans easily with standard mop or wipe-down routines. Because there is no mineral grit to trap dirt or shed over time, the tape stays hygienic and non-damaging to cleaning equipment even in high-turnover environments.

Ideal applications

• Swimming pool decks, spa surrounds, and shower rooms — barefoot-safe grip that stays comfortable when wet
• Nurseries, sensory rooms, and indoor play areas — no sharp grit against skin or knees
• Bath, shower, and wet-room floors at home or in care facilities
• Boat decks, marina walkways, and dockside walkways — waterproof, submersible after cure
• Commercial kitchens and food-prep wet zones — mop-friendly, no grit shed
• Clinical, medical, and hygiene-critical back-of-house — smooth cleaning, no bacterial harboring
• Residential and light-commercial stair nosings — comfortable and durable on flat step edges

Where Resilient fits in the family

iFloortape carries five members of the Resilient family, all sharing the same non-abrasive, embossed orange-peel rubbery top surface — no grit, waterproof, kind to bare skin. The differences are in profile thickness and emboss depth, which determine the ideal application:

• HES_RES (this product) — 0.040" thin, fine emboss. Entry-level for pools, showers, nurseries, marine, catering.
• HES_CR_MK2 — 0.050" medium, softer peaks. Barefoot + pet friendly, mop-friendly commercial zones, gym floors.
• HES_CR_MK3 — 0.050" medium, sharper peaks. Wet, dirty, and icy environments — outdoor stairs, docks, industrial walkways.
• HES_TCR — 0.078" thick, sharp peaks. Recessed stair-nose channels, milled tread edges.
• HES_LEAN — 0.028" thin, flexible. Cleanrooms, pharma, kitchens, curved and contoured surfaces.

Why choose Resilient over gritty anti-slip tape

Traditional anti-slip tapes use aluminum-oxide or silicon-carbide grit bonded to a PVC or foil backing. Grit-based tapes work well in industrial settings but are aggressive against bare skin, shed abrasive particles into cleaning equipment, and trap dirt and bacteria in their grit pockets. Resilient tape's embossed rubber-feel surface delivers reliable slip protection without any of those drawbacks — a critical advantage for:

• Barefoot environments (pools, spas, nurseries, showers, home baths)
• Skin-contact zones (children's play areas, sensory rooms, medical facilities)
• Hygiene-critical spaces (catering wet prep, clinical corridors)
• Clothing-contact zones where grit would abrade fabric

Colors and sizes

Colors: Black (HES_RES*N), Yellow (HES_RES*Y), Red (HES_RES*R), White (HES_RES*W)

Widths: 1", 2", 3", 4", 6" — all on 60-foot rolls

Installation notes

• Apply to clean, dry, dust-free surfaces at room temperature
• Firm-press or roller-press to activate the adhesive along the full length
• Allow the tape to fully cure before exposure to water — Resilient cannot be applied underwater, but can be submerged after full cure
• Trim to fit with a sharp utility knife; the flexible PVC film cuts cleanly without splintering

Specifications

Length

60 ft per roll

Total applied thickness

Approximately 0.040"

Material

Flexible PVC with rubberized top surface, factory-manipulated for soft rubber feel

Surface

Non-abrasive, embossed with fine orange-peel micro-texture

Coefficient of Friction

Dry: 106 · Wet: 42

Waterproof

Yes, submersible after full cure

Adhesive

Permanent pressure-sensitive; bonds to any clean, dry, flat surface

Underwater application

Not supported — must be applied to a dry surface and given time to cure before submersion

Compatible substrates

Concrete, tile, wood, metal, painted surfaces, most rigid plastics

Part numbers

HES_RES1N, HES_RES1Y, HES_RES1R, HES_RES1W, HES_RES2N, HES_RES2Y, HES_RES2R, HES_RES2W, HES_RES3N, HES_RES3Y, HES_RES3R, HES_RES3W, HES_RES4N, HES_RES4Y, HES_RES4R, HES_RES4W, HES_RES6N, HES_RES6Y, HES_RES6R, HES_RES6W

FAQ

Is Resilient tape safe for bare feet?
Yes — it's specifically designed for barefoot environments. The embossed orange-peel surface provides traction without the sandpaper-like abrasion of grit-based tapes.

Can I apply Resilient tape under water?
No — the tape must be installed on a dry surface and given time to cure. Once fully cured, the tape and its adhesive are waterproof and can be permanently submerged.

What's the difference between Resilient (RES) and Coarse Resilient (MK2/MK3/TCR/LEAN)?
All 5 products share the same rubbery, embossed, non-abrasive top surface. RES is thinnest (0.040") with the finest emboss — an economical, barefoot-safe choice for general wet-area use. The Coarse Resilient family adds a heavier profile with deeper emboss patterns, R10 DIN 51130 certification, and NFSI High-Traction rating for demanding wet, dirty, icy, or industrial environments.

Will it damage my cleaning equipment?
No. Resilient tape has no grit or abrasive particles that would shed and damage mops, brushes, or floor scrubbers. Clean it the same way you clean the surrounding floor.

What surfaces does it stick to?
Concrete, tile, painted surfaces, sealed wood, metal, and most rigid plastics. The surface must be clean, dry, and dust-free at application. For porous or oily substrates, prime with a solvent-based cleaner first.

Can it be printed with custom logos or safety messages?
Yes — custom-printed Resilient tape is available for larger orders. Common uses include "FOOD PREP ONLY," "SANITISE REGULARLY," barefoot-zone markers in public washrooms, and children's icons or directional graphics in play areas. Contact us for custom-print quantities and lead times.

See it in your application

Explore how this tape performs in real-world environments and find the exact size and color for your project:

• Anti-Slip Tape for Pools & Spas — Pool decks, shower stalls, spa surrounds, ladder rungs, and locker rooms — barefoot-safe grip on wet surfaces.
• Anti-Slip Tape for Boats, Docks & Marine — Boat decks, swim platforms, and boarding steps — non-abrasive traction that's kind to bare feet and swimwear.
• Anti-Slip Tape for Gyms & Fitness — Shower-to-locker transitions and low-load barefoot zones in fitness facilities.